ATEN Secure KVM Administrator’s guide
vii
About the Administrator’s Guide
This Administrator’s Guide is intended for authorized administrators only.
This Administrator’s Guide is provided to help authorized administrators audit logs and configure the
ATEN Secure KVM switch. To maximize security, it is recommended that administrators audit log
event records and the Secure KVM Switches’ configuration on a routine bases.
This Administrator’s Guide is applied to the following ATEN Secure KVM Switches
ATTENTION
If the tamper-evident seal is missing or peeled, avoid using the product and
contact your ATEN dealer
If all front panel LEDs (except the Power LED) flash continuously, or the
switch’s enclosure appears breached, avoid using this product and contact
your ATEN dealer
This Secure KVM Switch is equipped with active always-on chassis
intrusion detection security. Any attempt to open the enclosure will
permanently damage the switch, disable the switch, and void the warranty.
To maximize security and to prevent unauthorized access to the Secure
KVM Switch, please change the default password after your first
successful log in.
To Next Page
Loading...
Need help?
General
