QSG_F670_363.00_EN_01_2021-02-09
Direct mode – Sealed part differential volume test option
Pressure from 0 to 500 kPa (72.5 PSI).
This configuration can be used for test of small test part volumes.
Connection of the air supply to the filter input (0.6 MPa(87 PSI))
Connection to the vacuum (option)
Connection of the reference output to the reference part
Connection of the V1 output to the reference transfer volume
Connection of the V2 output to the test transfer volume
Connection of the test output to the part under test
10
Connection of the test output to the bell
12
including the part under test
11
for
differential volume test
To Next Page
Loading...
