ATEQ VT66MB
UM-VT66MB-EN ATEQ VT66MB User manual Page 16/81
5.2.3 Daimler trucks
Press Truck to create a new job for trucks with up to
seven axles, equipped with single or dual tires.
Once the truck configuration screen is displayed, select the type of vehicle – Tractor/truck,
trailer or semitruck. Use the + buttons to the right, to configure the numbers of wheels per
axle. Select the number of axles and wheels. The number of wheels are displayed on the
diagram of the truck, and underneath the screen.
Press on the - or + buttons to add or remove axles
and wheels to the truck being configured:
• 0, 1 or 2 shows the number of wheels on an
axle,
• 0 means that there is no axle to be added
• 1 means that the axle has single wheels,
• 2 means that the axle has dual wheels.
Either press Save, to store the vehicle
configuration as a favorite and be able to reuse for
To Next Page
Loading...
