ATEQ VT66MB
UM-VT66MB-EN ATEQ VT66MB User manual Page 42/81
Data is automatically saved at each step. It can be be found in the tool History.
It is recommended to read the sensor data to check that all data has been correctly
programmed, see chapter (X.X.X).
If the procedure has completed successfully, the tire data will have integrity level 2.
5.6.3 Reading the tire data from the sensor
After RFID Data programming, and at each maintenance, it is recommended to read the
tire data. The Read RFID, permits to verify the integrity, and ensure data is correctly
programmed.
To read the RFID tire data from the vehicle’s TPMS sensor:
• create a New job,
• press Tire Data.
The tire data reading and programming screen is displayed.
To Next Page
Loading...
