5.3 Read TPMS
The Read TPMS function consists in activating the TPMS sensors to read their data:
• sensor ID,
• tire pressure,
• temperature inside the tire,
• radio frequency of communication between the sensor and the tool,
• sensor battery status.
This procedure:
• verifies the current tire pressure and tire temperature
• ensures the TPMS sensors are working properly,
• determines if TPMS sensors are defective or low on battery
5.3.1 Read TPMS procedure
To achieve the best TPMS sensor reading, point the Tool's antenna towards the tire, on the
tire wall right next to the valve. Do not point the antenna against the rim or the valve stem.
5.3.2 Reading a TPMS sensor
To read the TPMS sensors, press the button New Job and select a vehicle Make, Model
and Year.
To Next Page
Loading...
