ATEQ VT66MB - Water & Moisture; Storage; Usage; Standards and References

ATEQ VT66MB
UM-VT66MB-EN ATEQ VT66MB User manual Page 4/81
• Clean the tool with a soft dry cloth, or if necessary, with a soft damp cloth with clean
water.
• Do not use any harsh chemical solvents such as acetone, thinner, brake cleaner,
alcohol, etc as this may damage the tool.
2.2.4 Water & Moisture
• Do not put the tool in contact with water or any other liquid.
• Never spill liquid of any kind onto the tool.
2.2.5 Storage
Do not use or store the tool in an area:
• exposed to direct sunlight,
• subject to excessive moisture.
2.2.6 Usage
• To reduce the risk of fire, do not operate the tool:
o in the vicinity of flammable liquids,
o in case of risk of exposure to explosive gases or vapors.
• Keep the tool away from heat sources.
• Do not operate the tool with the battery cover removed.
• Do not position the equipment so that it is difficult to operate the disconnecting device.
2.3 Standards and references
This device complies with:
• CE / EN standards
• Part 15 of the FCC Rules
• RoHS standards
2.4 Warnings
• Read the instructions before use.
• Wear safety goggles (user and bystanders).
• Do not use on live electrical circuits.
• Risk of entanglement.
Read the information on the declarations of certification and on recycling the
VT66MB tool on the warranty page 69 of this user guide.