ATEQ VT66MB - Special Function; Key Fob Test

ATEQ VT66MB
UM-VT66MB-EN ATEQ VT66MB User manual Page 57/81
• Put the new programmable sensor in front of the
antenna,
• press Trigger.
The message Successful programming is displayed
5.8 Special Function
5.8.1 Key fob test
This procedure tests the strength of the Radio Frequency (RF) signal emitted by the remote
key. If the signal is weak, replace the key fob battery.
To test the key fob:
• Press New job and select the vehicle’s Make, Model and Year
• press Key Fob Test.
The key fob test screen is displayed.