ATEQ VT66MB - Page 26

ATEQ VT66MB
UM-VT66MB-EN ATEQ VT66MB User manual Page 26/81
When you have selected the vehicle, the Read TPMS screen is displayed,
- the FL (Front Left) tire is circled in red to show that the reading of the TPMS sensor
concerns the front left wheel
- the first row displays the message Ready to Trigger.
• Place the tool against the sidewall of the front left
wheel.
• Press the activation button displayed in the
bottom left corner of the screen or use the activation
button
• The tool comes on and reads the TPMS sensor of the front left wheel.
• An animation is displayed on the FL row (Front Left) during the sensor activation
process, until the TPMS sensor has been located and read out.
Data from the sensor is displayed in the FL row. This data includes:
• ID, sensor identifier,
• PSI or BAR, pressure read in the tire in PSI or BAR,
• F or C, temperature found in the tire in degrees Fahrenheit or degrees Celsius,
• MHz, sensor communication frequency,
• BAT, sensor battery status.