ATEQ VT66MB - Page 30

ATEQ VT66MB
UM-VT66MB-EN ATEQ VT66MB User manual Page 30/81
A text explains step by step how to pair the vehicle’s ECU with the IDs of the vehicle’s TPMS
• Read and follow the on screen the procedure
• To activate the sensors, during the process press
Start Procedure.
• Read all sensors in the order as shown on the
screen.
For vehicles with auto relearn, it is recommended to check the TPMS sensors
before starting the auto relearn procedure, to ensure tire pressure all sensors
respond and that the tire pressure is correct.
5.4.3 OBD relearn
Please note that OBD relearn procedures are not available for Daimler vehicles.
The OBD procedure permits to write the TPMS sensor IDs directly into the ECU, in less
than 1 minute. The procedure resets the TPMS system and turns the TPMS light off.
To start an OBD relearn: