aterno Opti-Plus 5D - Technical Features; Thermostat Specifications; Heater Receiver Specifications

38
Technical features
• Wireless remote control device
• Frequency band : [868 – 868.6] MHz / [868,7 – 869,2] MHz
• Maximum radio power : < 10mW
• Receiver category: 2
• Average range between thermostat and heater: 100m outside
(varies depending on the electromagnetic environment).
• Installation in an environment with normal pollution levels.
• Class B device as described in EN 55032
Thermostat
• Power supply two
1.5V LR3 / LR03 - AAA type lithium batteries
(lifetime 10 years without backlight).
• Choice of 4 modes: Automatic (1 customisable program per day),
Frost Protection, Shutdown and Simple thermostat
• Override Comfort or Economy until the next change of program
• The following temperatures can be set:
- Comfort and Simple thermostat: from 5° to 30°C
- Economy: from 4.5 to 19°C.
- Frost Protection: from 5°C to 15°C
•
Backlit digital display
• Room unit: 142 x 80 x 15 mm
• Sliding panel provides access to the programming buttons
(with guide on the inside)
• Wall mounting
• Protection index: IP 30
• Class III insulation
• Storage temperature: –10°C to +60°C
• Operating temperature: 0°C to +40°C
Heater receiver
• Class II insulation
• Compatible with an Opti pilote powerline carrier energy manager (tariff
progra
mming, load shedding, remote control for Frost Protection, etc.)
• Integral proportional control (category B) of time base: 10 mins
e
2
re
T
tr
a
e
-
-
B
n
o
T
d
o
p
c
T
th
B
m
IM
r
(e
2705157_rev3_not_TAP_ATERNO_SMART 17/12/2019 12:32 Page 38