EN
33
7.3 - Adjusting the Frost Protection settings
➊ After validating the Economy temperature.
➋ Press or to choose the Frost Protection
temperature (5°C to 15°C)
➌ Press the button to validate and return to Automatic
mode.
7.4 - Return to the default setting values
From Automatic mode: Press and hold the button
for 3 seconds.
Default setting : Comfort = 19°C,
Economy = 15.5°C, Frost Protection = 7°C.
8 - Operation
There are 4 operating modes.
8.1 - Automatic mode
The thermostat follows the programming hour by hour,
alternating periods of Comfort and Economy.
Overriding Automatic mode
Pressing or allows an override until the next
change of program.
Example: The current programming is Economy, pressing the
button overrides Comfort mode until the next change of
program or the next time is pressed.
The ti
me slots of the ove
rride period change to Comfort mode
and the “Comfort” symbol flashes.
To cancel the override, press or .
2705157_rev3_not_TAP_ATERNO_SMART 17/12/2019 12:32 Page 33
To Next Page
Loading...