To Next PageTo Next Page
Need help?Do you have a question about the aterno Opti-Plus 5D and is the answer not in the manual?
Guidance on selecting the optimal placement for the thermostat, considering height and environmental factors.
Instructions for inserting batteries and configuring the thermostat's time settings.
Steps for pairing the thermostat with the heater and verifying wireless connection.
Procedure to unpair a heater from the thermostat.
Troubleshooting when the 'TH' LED flashes, indicating no information received.
Resolving issues with a blank screen or flashing battery indicator.
Overview of the thermostat's display elements, buttons, and operational modes.
Instructions for correctly inserting batteries into the thermostat.
Guidance on battery replacement, warning about worn batteries.
Steps to set the time on the thermostat, including minutes and hours.
Details on display colours indicating reduced, average, and high consumption.
How to set the desired Comfort and Economy temperatures.
Setting Frost Protection temp and returning to default values.
Using automatic programmed mode or manual simple thermostat mode.
Protecting against freezing or stopping heating for the season.
Setting Comfort or Economy for each hourly time slot, day by day.
Information on measured temperature, heating status, and consumption.
Conditions that void the warranty, such as damage or unauthorized modification.
Technical details on power supply, modes, temperature ranges, dimensions, and insulation.
Technical details for the heater receiver, including insulation and compatibility.
General| Temperature Control Accuracy | ± 0.5 °C |
|---|---|
| Display | LCD |
| Weight | 150 g |
| Sensor Type | NTC |
| Brand | aterno |
| Model | Opti-Plus 5D |
| Power Supply | 230 V AC, 50 Hz |
| Mounting | Wall mounting |
