Need help?Do you have a question about the Athena S Series and is the answer not in the manual?
General| Brand | Athena |
|---|---|
| Model | S Series |
| Category | Controller |
| Language | English |
Details UL certifications and applicable models for safety compliance.
Specific UL certification for auxiliary devices, models SCA, SUA.
Specific UL certification for temperature control equipment, models SCB, SCC, SUB, SUC.
Outlines the terms, limitations, and duration of the product warranty.
Overview of the Athena "S" Series Solid State Staging Controls and their function.
Explanation of the Up-Down mode, stage progression, and cooling transfer.
Explanation of the Circular mode for even operation of stages.
Illustrates common wiring and module arrangements for SC and SU controllers.
Details input, output, isolation, time delay, supply voltage, and physical dimensions.
Step-by-step guide for unpacking, selecting location, and mounting the controller.
Visual guides for connecting the controller for up to 10 or 11-18 steps.
Instructions for connecting contactor coils and power supply terminals.
Guidance on checking for fuse issues and connecting input signals correctly.
Critical safety notice regarding potential electric shock hazards from solid-state devices.
Details on the controller's modular components, their codes, and status lights.
Important reminder not to place modules in arbitrary positions or while the controller is energized.
Explains how the controller operates and introduces the adjustment process.
Guides on adjusting time proportioning, staging intervals, and timing trim pots.
Instructions for scaling input signals and optimizing system stability.
Information on controller fuses, their purpose, and replacement guidelines.
Details on configuring the controller for thermistor input for temperature control.
Procedure for testing the 'B' option by simulating a thermistor probe.
Details on setting up the 'C' option for outdoor reset and temperature control.
Explains the concept of reset ratio and how to select appropriate values for the 'C' option.
Describes how the 'C' option's outdoor reset feature affects heating control.
Guidelines for returning the controller to an authorized service center for repairs.
Notes on document limitations, proprietary information, and changes.
To Next Page
