Aerosol Photometer
Aerosol Photometer - 2i 50
Instructions
This first screens instruct the user to verify the reagent
selection as well as the aerosol line connection to the
upstream port. To continue with setting up the
instrument to the upstream aerosol, select Proceed
and press Enter. To return to the main menu and
change you selection, select Back button and press
Enter.
Figure 16: Set 100% to Upstream Concentration Initial Screenshot
Measuring the Upstream Aerosol
After the operator selects Proceed, the instrument will
attempt to set its 100% reference to the upstream
aerosol. An animated icon will be displayed on the
screen during this operation. During this operation, the
reagent, alarm set point and alarms options are
disabled.
Figure 17: Set 100% to Upstream Concentration Measurement Screenshot
Measure Upstream Concentration
Connect 100% line to the Upstream port.
Verify you Reagent Selection
Select Proceed when done or Exit to
change your 100% Reference selection.
16 Feb 2012 09:59
Back Proceed
Reagent
PAO 0.001
Sampling
PAO
Measure Upstream
Connect 100% Line
Verify Reagent
Proceed
Back
16 Feb 2012 09:59
Reagent
PAO 0.001
Sampling
Measure Upstream Concentration
Reading Upstream Concentration
PAO
Measure Upstream
Reading Upstream
Concentration
To Next Page
Loading...
Need help?
General
