EasyManua.ls Logo

ATI Technologies THRASHER LZ170-3A - General Maintenance and Lubrication Chart

ATI Technologies THRASHER LZ170-3A
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-
4
General maintenance and lubrication chart
TIP
For ATVs not equipped with an odometer or an hour meter, follow the month maintenance intervals.
For ATVs equipped with an odometer or an hour meter, Follow the km (mi) or hours maintenance intervals.
However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance intervals should be followed.
Items marked with an asterisk should be performed by a dealer as they require special tools, data and technical skills.
NO.
ITEM
CHECK OR
MAINTENANCE JOB
Whichever
comes first
INITIAL
EVERY
month
1
3
6
6
12
Km
(mi)
320
(200)
1300
(800)
2500
(1600)
2500
(1600)
5000
(3200)
hours
20
80
160
160
320
1
*
Air filter element
● Clean and replace if necessary
Every 20-40 hours (more often in wet or dusty areas)
2
*
Front brake
Check operation and correct if necessary.
Check fluid level and ATV for fluid leakage, and correct if
necessary. (If your ATV front brake is disc brake)
Replace brake pads
Whenever worn to the limit
3
*
Rear brake
Check operation and correct if necessary.
Check fluid level and ATV for fluid leakage, and correct if
necessary.
Replace brake pads.
Whenever worn to the limit

Table of Contents