3. Turn the key to “ON” and turn on the electrical circuits to
check if the devices operate.
4. If the fuse immediately blows again, have a dealer check
the electrical system.
5. Install the battery holding plate by installing the bolts, and
then hook the band to secure the owner’s tool kit.
6. Install the seat.
Replacing a headlight bulb
If a headlight bulb burns out, replace it as follows.
1. Remove the headlight unit by removing the bolt.
1. Headlight unit
2. Bolt
2. Disconnect the headlight coupler.
3. Remove the headlight bulb holder cover.
1. Headlight bulb holder cover
4. Remove the headlight bulb holder by pushing it in and
turning it counterclockwise, and then remove the burnt-
out bulb.
To Next Page
Loading...