1. Headlight bulb holder
5. Place a new headlight bulb into position.
NOTICE: Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the transparency
of the glass, the luminosity of the bulb, and the bulb
life will be adversely affected. Thoroughly clean off any
dirt and fingerprints on the headlight bulb using a cloth
moistened with alcohol or thinner.
1. Do not touch the glass part of the bulb.
6. Install the headlight bulb holder by pushing it in and
turning it clockwise.
7. Install the headlight bulb holder cover.
8. Connect the headlight coupler.
9. Install the headlight unit by installing the bolt.
10. Adjust the headlight beam if necessary.
Adjusting a headlight beam
NOTICE
It is advisable to have a dealer make this adjustment.
To raise a headlight beam, turn the headlight beam adjusting
bolt counter-clockwise.
To lower a headlight beam, turn the adjusting bolt clockwise.
To Next Page
Loading...