PRE-OPERATION CHECKS
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and
maintenance procedures and schedules described in the owner’s Manual.
WARNING
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage. Do
not operate the vehicle if you find any problem.
If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by your dealer.
Before using this vehicle, check the following points:
● Check fuel level in fuel tank, and add recommended fuel if necessary.
● Check fuel line for leakage. Correct if necessary.
● Check oil level in engine, and add recommended oil to specified level if
necessary.
● Check ATV for oil leakage. Correct if necessary.
● Check operation. If soft or spongy, have a dealer bleed hydraulic system.
● Check brake pads for wear,and replace if necessary.
● Check brake fluid level in reservoir, and add specified brake fluid to
specified level if necessary.
● Check hydraulic system for leakage. Correct if necessary.
To Next Page
Loading...