13
EN
Installation
PREPARING THE INSTALLATION OF THE DEVICE
Installation guidelines
- This device was designed to be installed in residential premises. In any
other case, please call your distributor.
- Installation must comply with the standards currently enforced in the
country of use.
- The device must be supplied with 230V single-phase 50Hz.
Keep the device away from any draughts that may interfere
with its operation (e.g.: under a centrally controlled fan, etc...).
Do not install the devise under a xed socket.
Comply with the minimum distances
from any furniture units when posi-
tioning the device.
Do not install a shelf above vertical
devices.
Volume 1 No electrical device
Volume 2
Class II IPX24 electri
-
cal device (EN 60335-
2-43 : 2003/A2 : 2008)
50
50
12
10
10
To Next Page
Loading...
