WARNING Slippery machine surface hazard
There is a risk that the machine (for example, the
handle and other surfaces) is slippery due to
grease, oil, or other substances. If the machine is
slippery, there is a risk that you might lose your
grip, drop the machine, and/or come in contact
with the working tool during operation of the
machine. Any such event can cause injury. To
reduce this risk:
►
Always make sure that the handles and other
gripping surfaces of the machine are not
slippery.
►
Always make sure that the handles and other
gripping surfaces are free from grease and oil.
To reduce the risk of serious injury or death to
yourself or others, read and understand the Safety
and operating instruction before installing,
operating, repairing, maintaining, or changing
accessories on the machine.
Post this Safety and operating instruction at work
locations, provide copies to employees, and make
sure that everyone reads the Safety and operating
instruction before operating or servicing the
machine. For professional use only.
In addition, the operator or the operator's employer
must assess the specific risks that may be present
as a result of each use of the machine.
Maintenance, precautions
WARNING Machine modification
Any machine modification may result in bodily
injuries to yourself or others.
►
Never modify the machine. Modified machines
are not covered by warranty or product liability.
►
Never tamper with the wiring or the ECU.
►
Always use original parts, working tools and
accessories.
►
Change damaged parts immediately.
►
Replace worn components in good time.
CAUTION High temperature
The machine's front cover, exhaust gas, exhaust
pipe and accessible metallic parts can be hot
during and after operation. Contact with any of
these can lead to burns.
►
Never touch a hot front cover.
►
Never touch the hot exhaust pipe.
►
Never touch the bottom of the machine when it
is hot.
►
Wait until the front cover, exhaust pipe and
accessible metallic parts of the machine has
cooled down before carrying out maintenance
work.
►
Direct the exhaust pipe away from you while
keeping any other persons within the work area
in mind.
CAUTION Hot working tool
The tip of the working tool can become hot and
sharp when used. Touching it can lead to burns
and cuts.
►
Never touch a hot or sharp working tool.
►
Wait until the working tool has cooled down
before carrying out maintenance work.
Storage, precautions
◆
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
Safety and operating instructions COBRA PROi
10 © Construction Tools PC AB | 9800 1758 01 | 2017-01-10
Original instructions
To Next Page
Loading...
Need help?
General
