Need help?Do you have a question about the Atlas Copco FlexiROC T35 R and is the answer not in the manual?
General| Drill rig type | Top Hammer |
|---|---|
| Rotation Speed | 0-150 rpm |
| Air Pressure | 10 bar |
| Application | Quarries; Construction; Surface mining |
| Hole diameter | 64 mm |
| Air delivery | 10.5 m³/min |
| Operating Weight | 15, 000 kg |
| Air Consumption | 10.5 m³/min |
Details pre-operation checks and safety procedures.
Lists checks to perform after starting the rig.
Describes checks to be performed during drilling operations.
Overview of the rig's control elements and their locations.
Instructions for starting the diesel engine and associated checks.
Procedures for safely stopping the diesel engine.
Instructions and safety precautions for moving the rig.
Steps for setting up the drill rig for drilling operations.
General guidelines for correctly setting up the drill rig.
Steps to initiate the drilling process.
Important checks to perform while drilling is in progress.
Procedures for breaking loose stuck drill rods.
Instructions for adding and removing drill rods.
Steps for changing the drill bit.
Troubleshooting steps for common drilling issues.
To Next Page