Atlas Copco FlexiROC T35 R User Manual

FlexiROC T35 R/T40 R 8 Drilling
104 No: 3171473547.1 en
3.
Leave percussion active until all the drill rod couplings/couplings are loose.
4.
Then deactivate percussion by pressing button S101 once.
!
NOTE: Remember that the rotation stop button S101 is a "toggle
switch", rotation will not start unless the button is reset! For informa-
tion see chapter: Controls
!
NOTE: High percussion is better when releasing.
8.3.2 Automatic break loose
Put the upper drill-steel support in neutral
8.4 Rod adding
WARNING
Serious injury
Danger of accidental operation
u May cause serious personal injury and damage to property
u The operator must always control of the rig and the remote control box
u Always check that the controls are correctly adjusted before operating
u Always deactivate the remote control box when not in use
u The remote control box must not be operated from the rig when the winch is being used

Atlas Copco FlexiROC T35 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T35 R
Category	Construction Equipment
Language	English