FlexiROC T35 R/T40 R 6 Operating
77 No: 3171473547.1 en
è
A symbol will light up on the diesel engine display once the remote control box
has been activated.
7.
Unless a control is used on the remote control box within 10 seconds, the box will go
into so-called "standby mode". Press button S186 (B) to reactivate the remote control
box.
!
NOTE: The 10 seconds timer only works in the "Tramming/Posi-
tioning" position
6.2 Diesel engine starting
!
NOTE: Monitor pressure gauges and display for diesel engine when in operation.
!
NOTE: After an emergency stop, the procedure for obtaining radio contact between the
rig and the radio box must be done again.
1.
Make sure the compressor is unloaded. Switch S180, position (c).
To Next Page
Loading...
