Atlas Copco FlexiROC T35 R

FlexiROC T35 R/T40 R 4 Daily checks
28 No: 3171473547.1 en
Symbol Description Symbol Description
Coolant level
Indicates that the
coolant level to the en-
gine is too low. Engine
stopped automatically
Compressor temperat-
ure
Indicates that the com-
pressor temperature is
too high. Engine
stopped automatically
Hydraulic oil level
Indicates that the hy-
draulic oil level is too
low. Engine stopped
automatically
Hydraulic Oil Temp
Indicates that the hy-
draulic oil temperature
is too high. Engine
stopped automatically
High soot content in
the particulate filter
(DPF)
Shows when the soot
content has reached
80%
High exhaust gas tem-
perature (HEST)
Illuminates when regen-
eration has started.
Automatic regenera-
tion blocked
Used when there is a
risk of personal injury or
damage to property
Table7: Red symbols (Warning symbols that stop the diesel engine)
4.3.3 Checks
Check point Inspection Instructions
Drill rig. Visual check Make sure there are no signs of
leaks, damage, breakage or
cracks.
Hydraulic oil Oil level Check oil level. Top up as ne-
cessary.
Lubrication Oil level Check oil level. Top up as ne-
cessary.
Engine oil Oil level Check oil level. Top up as ne-
cessary.
Compressor oil Oil level Check oil level. Top up as ne-
cessary.
Water separator Fuel prefilter Drain off the water
Table8: Checks before starting.
For further instructions, see: Maintenance instructions