FlexiROC T35 R/T40 R 7 Before drilling
98 No: 3171473547.1 en
7.4.2 Downhill setup
Left: Correct position for drilling uphill. Right: Wrong position.
7.4.3 Downhill setup
Set up the drill rig as close to the horizontal as possible.
Left: Correct position for drilling downhill. Right: Wrong position for drilling downhill.
7.4.4 Setup - Transverse incline
NOTICE! The risk of slipping is greatest when set-up on a transverse incline.
NOTICE! Always observe ground conditions.
NOTICE! Always be very careful when setting up on a transverse incline, always use
smooth movements during setup.
To Next Page
Loading...
