EasyManuals Logo
Home>Atlas Copco>Construction Equipment>FlexiROC T35 R

Atlas Copco FlexiROC T35 R User Manual

Atlas Copco FlexiROC T35 R
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
FlexiROC T35 R/T40 R 8 Drilling
103 No: 3171473547.1 en
If water emerges from the drill hole Switch off DCT to protect the filters
Table37: The borehole:
8.3 Break loose
WARNING
Serious injury
Danger of accidental operation
u May cause serious personal injury and damage to property
u The operator must always control of the rig and the remote control box
u Always check that the controls are correctly adjusted before operating
u Always deactivate the remote control box when not in use
u The remote control box must not be operated from the rig when the winch is being used
8.3.1 Manual loosening
Right-hand multi-function lever S261.
1.
Deactivate self-holding for feed and rotation. Button S101 on the remote control box.
2.
Feed can now be controlled manually using the right-hand multi-function lever in sec-
tors (f) and (h).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atlas Copco FlexiROC T35 R and is the answer not in the manual?

Atlas Copco FlexiROC T35 R Specifications

General IconGeneral
BrandAtlas Copco
ModelFlexiROC T35 R
CategoryConstruction Equipment
LanguageEnglish

Related product manuals