To Next PageTo Next Page
Need help?Do you have a question about the Atlas Copco CS 14 and is the answer not in the manual?
General| Brand | Atlas Copco |
|---|---|
| Model | CS 14 |
| Category | Construction Equipment |
| Language | English |
Defines Danger, Warning, and Caution signal words used in safety instructions.
Outlines requirements for qualified and trained personnel for operation and maintenance.
Specifies qualifications required for persons undertaking hoisting and transport operations.
Details qualifications needed for storage, repair, maintenance, and disposal of equipment.
Defines qualifications required for drill rig operators for safe and efficient operation.
Lists essential personal protective equipment (PPE) required for safe operation.
Warns against operating machinery under the influence of drugs, alcohol, or medication.
Details precautions for the safety area, including falling objects and unauthorized personnel.
Provides safety guidelines for lifting and transporting heavy equipment safely.
Warns about high-pressure hydraulic oil penetrating skin and causing damage.
Alerts to hazards from dust and compressed air created during drilling.
Emphasizes securing the drill rig and setting controls to neutral to prevent movement.
Highlights the risk of permanent hearing loss from high noise levels and advises hearing protection.
Warns about the extreme danger of rotating drillpipes, tools, and augers.
Details actions to take during an emergency situation, including using the emergency stop.
Explains the risk of explosion from contact with gas lines and explosives.
Warns about severe injury or death from contact with overhead electrical power lines.
Advises caution with hot hydraulic oil and pressurized systems to prevent injury.
Warns that modifications can cause bodily injury and advises contacting the manufacturer.
Stresses securing components during service and maintenance to prevent falls.
Advises consulting Atlas Copco before welding and warns about paint hazards.
Warns to ensure the engine is off before maintenance and to be careful with hot fluids.
Advises on the safe handling and disposal of accumulators and pressure vessels.
States that only authorized electricians should work on electrical systems.
Warns that hydraulic oil contact with skin can cause eczema.
Explains prohibition signs like 'No admittance' and 'Don't step here'.
Details general warning signs for hazards like moving parts, noise, and slip risks.
Highlights the risk of slipping due to the machine's operation.
Covers signs requiring reading instructions and observing warnings.
Details safety measures for service work, especially regarding boom stability.
Warns about high voltage and the need for qualified electricians for electrical work.
Indicates the location of a fire extinguisher and its system actuator.
Points out the lifting eye, water inlet, air intake, and fuel filling point.
Identifies the fuel cock, battery switch, and points for draining fluids.
Indicates the washer fluid reservoir and the emergency reverse button.
Explains the information found on the rig data plate, including type and serial number.
Mentions that electrical components have their own identifying nameplates.
Describes precautions for the AC generator, including battery cable disconnection.
Explains instructions related to the PLC cabinet and data boxes.
