Atlas Copco CS 14

Safety and operating instructions
© 2010 Atlas Copco Craelius AB |
2010-06-18
Introduction
Introduction
CS 14 Crawler Safety and Operating instructions - Appendix is a supplement to the regular
documentation for the CS CHRISTENSEN 14 drill rig and shall be added to the Safety and
Operating instructions for the CS CHRISTENSEN 14 drill rig
These instructions are intended for operators of the Atlas Copco equipment. The aim of the
instructions is to provide you with knowledge of how to use the equipment in an efficient
and safe way. These instructions also give you advice and tell you how to perform regular
maintenance on the equipment. It does not replace thorough training of operator, it is a
complement. For further information concerning service measures, please contact your
nearest Atlas Copco representative.
Always read
these instructio
ns carefully a
nd make sur
e that you un
derstand a
ll of them
before starting for the first time.
The owner of the equipment is granted the permission to take copies of this publication
solely for internal use. It is recommended, however, to order additional copies from Atlas
Copco representative in order to benefit from the latest revision. Atlas Copco Craelius AB
reserves the right to make changes in its products in order to improve design or performance
character
istics without notice. The
information in this publication is
assumed to be accurate at
the time of publication, but is subject to changes in order to remedy detected deficiencies or
to follow changes in the product.
Any user of th
is publication
is requested
to inform
Atlas Copco Cra
elius
AB about d
eficiencies
found, particularly in matters concerning product safety.