Atlas Copco CS 14

15
Safety and operating
instructions
© 2010 Atlas Copco Craelius AB | 2010-06-28
03 Signs and stickers Ed.0
A
B
C
D
A.
The foot pr
otection symbo
l means tha
t you have
to wear boots.
B.
The
eye, ear
and
head
protections symbol
means that you have to wear a hard hat, eye and
ear protection.
C.
The
hand protection
symbol means
that you
have to wear hand protection.
D.
The
instruct
ion
book
symbol means
that
you have to read the Safety and Operating
instrictuins before the equipment is used for the
first time.
Alternating current
generator
GDE00020 A

Read the instructions.

This rig is equipped with an alternating current
generator (alternator).

Disconnect the battery cables before removing the
generator or regulator and when giving the battery
a booster charge.

When performing electrical welding of the rig or
fitted equipment, detach the charging regulator
cable as well.
Rig with PLC cabinet
PLC
GDE00021 A

Read the instructions.

This rig is equipped with data boxes.

Isolate or remove data boxes when giving the
battery a booster charge or carrying out welding on
the rig.