FlexiROC T35 R/T40 R 2 General
9 No: 3171473547.1 en
2 General
2.1 Foreword
This instruction manual is part of the complete delivery of the drill rig. It provides informa-
tion on the design and operation of the drill rig and contains advice and the measures ne-
cessary to keep the rig operational. This instruction manual is no replacement for thorough
training on the drill rig.
This instruction manual should be read in advance by all persons who are to operate or re-
pair the drill rig or carry out maintenance on it.
See separate instructions for documentation on the rock drill/rotation unit, the diesel engine
and certain other components.
For other questions refer to the local Atlas Copco company office. Addresses and tele-
phone numbers are in the Maintenance instructions.
2.2 Application
The drilling equipment is designed mainly for drilling blast holes in e.g. quarries and open-
cast mines. All other uses are considered inappropriate.
Examples of inappropriate use:
n Lifting and transporting loads and people
n Supporting objects
n Scaling rock
The manufacturer is not liable for damage caused by inappropriate use.
n It is essential the operator has read and comprehends the operator, maintenance and
overhauling instruction as well as the maintenance schedules.
n The drilling equipment must only be used, maintained and repaired by personnel well
conversant with the equipment and the dangers involved.
n It is essential that personnel observe general and local safety, health and traffic regula-
tions.
n The manufacturer is not liable to damage caused by any arbitrary changes made to
the drilling equipment.
n There must be no work in, on or in the vicinity of the machine when there is a risk of
lightning.
To Next Page
Loading...
Need help?
General
