To Next Page

To Previous Page

FlexiROC T35 R/T40 R 4 Daily checks

29 No: 3171473547.1 en

4.3.4 Fuel filter

Fuel filter.

Check point Inspection Instructions

Water separator Primary fuel filter Drain off the water (A).

Table9: Fuel filter.

4.4 Functionality test after start

4.4.1 Checks

Check point Inspection Instructions

Emergency stop Function Check that all emergency stops

are working (see chapter Safety

for location)

Limit position sensor Function Make sure the sensors are in

working order

Calibration sensors Function Make sure the cradle is calib-

rated correctly

Rock drill Rock drill hydraulic hoses Make sure there is no abnormal

vibration.

Rock drill Visual check Make sure the lubrication is in

working order

Engine display Visual check Make sure there are no faults in-

dicated

Dust collector (DCT) Suction ability and filter cleaning Check filters, suction hose and

drill-steel support gasket

Hydraulic Oil Filter Visual check Make sure the hydraulic oil filter

is not clogged

Atlas Copco FlexiROC T35 R User Manual

Questions and Answers: