Atlas Copco FlexiROC T35 R User Manual

FlexiROC T35 R/T40 R 4 Daily checks
27 No: 3171473547.1 en
Symbol Description Symbol Description
Battery
Indicates that the
voltage from the battery
is less than 24V
Compressor air filter
Indicates that the com-
pressor air filter is
clogged
ECL collection
Indicates that the ECL
collection is too low or
too high
ECM
Indicates an ECM error
Engine temperature
The engine temperature
is becoming too high
Engine air filter
Indicates that the en-
gine air filter is clogged
Engine reduction
Indicates that a fault
has arisen and the en-
gine output is limited
Intake temperature
Indicates that the intake
temperature in the en-
gine is too high
Fuel level
Indicates low fuel level
Fuel temperature
Indicates that the en-
gine's fuel temperature
is too high
Fuel pressure
Indicates that the fuel
injection pressure is ab-
normal
Engine oil pressure
Indicates that the oil
pressure to the engine
is becoming too low
Engine Sensors
Indicates that an error
occurred in the engine
sensor, the engine is
stopped automatically
Drill bit
Indicates that replace-
ment is due
Length Sensor
B172 Sensor error
Boom articulation
sensor
D170 Sensor error
Angle sensors
D171 Sensor error
Length Sensor
D172 Sensor error
Table6: Yellow symbols (Warning symbols)
Symbol Description Symbol Description
Engine oil pressure
Engine oil pressure is
too low. Engine stopped
automatically
Engine temperature
Engine temperature is
too high. Engine
stopped automatically

Atlas Copco FlexiROC T35 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T35 R
Category	Construction Equipment
Language	English