119
Instruction book
9096 3321 00
(1): or yearly, whichever comes first
(2): or every 2 years, whichever comes first
Important
8.2 Drive motor
Bearing maintenance
The bearing at the non-drive end side is greased for life.
The bearing at the drive end side is lubricated by the oil system.
sruohgninnuRnoitarepO
)1(0004
ocpoCsaltAfI.retlifliodnalioegnahc,desusidiulFedargdooF-otoRocpoCsaltAfI
.r
etlifliodnalioegnahc,desusidiulFtcejnI-otoR evobasierutarepmetlio/riafI(
001
0
)egnahcliorofocpoCsaltAtlusnoc,C .
)1(0004
.tnemeleretlifriaehtecalpeR )tnemnorivneytsudrofyltneuqerferoM
( .
.)elbacilppaerehw(tenibaccirtceleehtfotnemeleretlifehtecalpeR
.sreloocnaelC
.sgnidaererutarepmetdnaer
usserpkcehC
.tsetyalpsid/DELatuoyrraC
.segakaelrofkcehC
noitceseeS.niardcitamotuaehtforetlifehtnaelcot)mD(evlavniardlaunamehtnepO
metsysetasnednoC .
.noitcnufnwod-tuhserutarepmettseT
)1(0004
.egakaelretawelbiss
oprofkcehC:stinudelooc-retawnO
2(0008) .retlifliodnalioegnahc,desusidiulFytuDdnetX-otoRocpoCsaltAfI
.decal
pertnemelerotarapeslioehtevaH
Always consult Atlas Copco if a timer setting has to be changed.
For the change interval of oil and oil filter in extreme conditions of temperature,
humidity or cooling air, consult your Atlas Copco Customer Centre.
Any leakage should be attended to immediately. Damaged hoses or flexible joints
must be replaced.
To Next Page
Loading...
