Atlas Copco GA110 User Manual

Atlas Copco Stationary Air Compressors
Important
1. This book applies to the compressors from serial number
AIF-024 378 onwards.
2. This book must be used together with the "User manual for Elektronikon
®
regulator", printed matter no.
2920 1291 0x.
*2920125102*
No. 2920 1251 02
Registration code: APC G ≥ 90/'99 / 38 / 995
Replaces 2920 1251 01
2000-01
GA90 - GA110 - GA132 - GA160 - GA200 - GA250 - GA315
GA90 W - GA110 W - GA132 W - GA160 W - GA200 W -
GA250 W - GA315 W
Instruction Book
• Copyright 2000, Atlas Copco Airpower n.v., Antwerp, Belgium.
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies
in particular to trademarks, model denominations, part numbers and drawings.
• This instruction book meets the requirements for instructions specified by the machinery directive
98/37/EC and is valid for CE as well as non-CE labelled machines

Atlas Copco GA110 Specifications

General

Brand	Atlas Copco
Model	GA110
Category	Air Compressor
Language	English

Summary

1 Leading Particulars

1.1 General description

Overview of GA and GA W stationary air compressors.

1.2 Elektronikon® control system

Description of the electronic control system and its functions.

1.3 Regulating system

Explanation of how the compressor regulates pressure and airflow.

1.4 Energy recovery

Information on recovering heat from compression for hot water.

1.5 Heavy-duty filters

Details on optional heavy-duty filters for contaminated environments.

1.6 Oil/water separation

Information on oil/water separators for environmental compliance.

2 Installation

2.1 Dimension drawings

Technical drawings showing compressor dimensions and connections.

2.2 Installation proposal

Guidance on site preparation and compressor placement.

2.3 Electric cables

Specifications for electrical cable sizing and connections.

2.4 Pictographs

Explanation of pictographs used on the control panel and bodywork.

2.5 Cooling water requirements

Requirements for cooling water quality and flow for GA W models.

3 Operating Instructions

3.1 Preparation for initial start-up

Steps to take before the first operation of the compressor.

3.2 Before starting

Pre-start checks and safety precautions.

3.3 Routine starting

Procedure for normal compressor startup.

3.4 Starting after emergency stop or shut-down

Steps to restart the compressor after a shutdown.

3.5 During operation

How to monitor and control the compressor during operation.

3.6 Manual unloading/loading

How to manually control the loading and unloading states.

3.7 Stopping

Procedures for stopping the compressor safely.

3.8 Taking out of operation

Steps for decommissioning or long-term storage.

4 Maintenance

4.1 Preventive maintenance schedule for the compressor

Scheduled maintenance tasks and intervals for the compressor.

4.2 Motors

Maintenance procedures for drive and fan motors.

4.3 Oil specifications

Recommended oil types and specifications for lubrication.

4.4 Oil change

Steps for draining and refilling the compressor oil.

4.5 Oil filter change

Procedure for replacing the oil filters.

4.6 Storage after installation

Recommendations for storing the compressor when not in use.

4.7 Service kits

Information on available service kits for maintenance.

5 Adjustments and Servicing Procedures

5.1 Air filters

Instructions for checking and replacing air filters.

5.2 Coolers

Guidance on cleaning and maintaining air and oil coolers.

5.3 Safety valve

Information on operating and testing the safety valve.

6 Problem Solving

Faults and suggested remedies

Troubleshooting common messages and faults displayed by the unit.

7 Principal Data

7.1 Readings on display

Explanation of information shown on the compressor display.

7.2 Programmable settings

Overview of adjustable settings for compressor operation.

7.3 Settings of safety valves

Specific settings and important notes for safety valves.

7.4 Settings of overload relay, circuit breakers and fuses

Recommended settings for motor overload relays and fuses.

7.5 Compressor specifications

Detailed technical specifications for various compressor models.

7.6 Conversion list of Sl units into British/US units

Cross-reference table for unit conversions.