Atlas Copco GA132 User Manual

Atlas Copco Stationary Air Compressors
Important
1. This book applies to the compressors from serial number
AIF-024 378 onwards.
2. This book must be used together with the "User manual for Elektronikon
®
regulator", printed matter no.
2920 1291 0x.
*2920125102*
No. 2920 1251 02
Registration code: APC G ≥ 90/'99 / 38 / 995
Replaces 2920 1251 01
2000-01
GA90 - GA110 - GA132 - GA160 - GA200 - GA250 - GA315
GA90 W - GA110 W - GA132 W - GA160 W - GA200 W -
GA250 W - GA315 W
Instruction Book
• Copyright 2000, Atlas Copco Airpower n.v., Antwerp, Belgium.
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies
in particular to trademarks, model denominations, part numbers and drawings.
• This instruction book meets the requirements for instructions specified by the machinery directive
98/37/EC and is valid for CE as well as non-CE labelled machines

Atlas Copco GA132 Specifications

General

Brand	Atlas Copco
Model	GA132
Category	Air Compressor
Language	English

Summary

Leading Particulars

1.1 General description

Describes the compressors and their types.

1.2 Elektronikon® control system

Details the electronic control system for operation.

1.3 Regulating system

Explains the system logic for pressure regulation.

Installation

2.1 Dimension drawings

Provides physical dimensions and layouts for installation.

2.3 Electric cables

Details electrical cable requirements and sizing.

2.5 Cooling water requirements

Specifies requirements for cooling water.

Operating instructions

3.1 Preparation for initial start-up

Steps before the first operation.

3.3 Routine starting

Describes the normal starting procedure.

3.5 During operation

Instructions for operating the compressor.

3.7 Stopping

Procedures for stopping the compressor.

Maintenance

4.1 Preventive maintenance schedule for the compressor

Outlines regular maintenance tasks.

4.2 Motors

Details maintenance for motors.

4.4 Oil change

Procedure for changing the oil.

Adjustments and Servicing Procedures

5.1 Air filters

Describes air filter maintenance.

5.3 Safety valve

Details operation and testing of safety valves.

Problem Solving

Faults and suggested remedies

Lists common issues and their solutions.

Principal Data

7.1 Readings on display

Explains information shown on the display.

7.2 Programmable settings

Details configurable operational parameters.

7.4 Settings of overload relay, circuit breakers and fuses

Provides electrical protection settings.