EasyManua.ls Logo

Atlas Copco GA30 User Manual

Atlas Copco GA30
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Atlas Copco Stationary Air Compressors
GA5-7-11C-11-15-18-22-30C-30-37-45-55C-55-75-90C and
GA30 W-37 W-45 W-55C W-55 W-75 W-90C W
With Elektronikon I or Elektronikon II regulator
User manual for Elektronikon
®
I and II regulators

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Atlas Copco GA30 and is the answer not in the manual?

Atlas Copco GA30 Specifications

General IconGeneral
ModelGA30
CategoryAir Compressor
TypeRotary Screw Compressor
Power30 kW
CoolingAir Cooled
Width1100 mm

Summary

SAFETY PRECAUTIONS

Installation

Guidelines for installing the compressor unit safely and correctly.

PART 1 - ELEKTRONIKON I REGULATOR

1 General description

Overview of the Elektronikon I regulator's basic functions and operation.

2 Control panel

Description of the buttons, LEDs, and display of the Elektronikon I control panel.

3 Display

Explanation of screen pictographs, main screen, and scrolling through displays.

4 Shut-down warning

Details on warnings for high compressor element outlet and dewpoint temperatures.

5 Shut-down

Information on compressor shutdown conditions like temperature and motor overload.

6 Service warning

Explanation of service warnings triggered by the service timer.

7 Scrolling through all screens

Guide on navigating through various screens and data registers.

PART 2 - ELEKTRONIKON II REGULATOR

1 General description

Overview of the Elektronikon II regulator's functions and operation for air compressors.

2 Control panel

Description of the Elektronikon II control panel, including LEDs, buttons, and keys.

3 Menu-driven control programs

Explanation of accessing and using menu-driven control programs.

4 Quick look at actual compressor status

How to quickly view the compressor's current operational status.

5 Status data menu

Accessing compressor status, protection functions, and resetting alerts.

6 Measured data menu

Retrieving actual measured data and input statuses.

7 Counters menu

Accessing cumulative data like running hours and motor starts.

8 Test menu

Performing a display test to check pixel and LED functionality.

9 Modify params menu

Accessing menus for programming parameters, protections, and settings.

10 Modifying parameters

10.1 Modifying the loading and unloading pressures

How to adjust the pressure settings for compressor operation.

11 Modifying protection settings

11.1 Modifying settings for compressor element

Adjusting protection parameters for compressor element temperature.

12 Modifying service plans

13 Programming Clock function

13.1 Programming start/stop/pressure band commands

Setting up automated compressor start, stop, and pressure band changes.

13.2 To activate/deactivate the timer

Enabling or disabling the timer for programmed commands.

13.3 To modify a command

Changing existing programmed commands for timing or parameters.

13.4 To add a command

Adding new start/stop or pressure band commands to the schedule.

13.5 To delete commands

Removing programmed commands from the schedule.

14 Configuration menu

14.1 Programming compressor control modes

Setting compressor control modes like local, remote, or LAN.

15 Service menu

16 Saved data menu

17 Programmable settings

17.1 Parameters

List and explanation of various programmable settings for the compressor.

17.2 Protections

Related product manuals