To Next PageTo Next Page
Need help?Do you have a question about the Atlas Copco GA315 and is the answer not in the manual?
General| Model | GA315 |
|---|---|
| Power Output | 315 kW |
| Working pressure | 4-13 bar(e) / 58-189 psig |
| Noise Level | 75 dB(A) |
| Weight | 5300 kg |
| Dimensions (L x W x H) | 3000 x 1800 x 2100 mm |
| Drive Type | Direct Drive |
| Type | Rotary Screw |
| Category | Air Compressor |
| FAD | 50.0 m³/min |
| Pressure | 7.5 bar |
| Free Air Delivery | 50.0 m³/min |
Overview of Atlas Copco stationary air compressors, models GA and GA W.
Details of the Elektronikon regulator, control panel, and operational modes.
Description of air flow, condensate drain, and oil systems.
Technical drawings showing physical dimensions for various compressor models.
Recommendations for compressor placement, ventilation, and pipe connections.
Guidelines for selecting and sizing electrical cables for different compressor models.
Identification of symbols and indicators on the compressor control panel.
General guidelines for water quality and flow for GA W compressors.
Steps before the first operation, including checks and readings.
Safety precautions and checks before starting the compressor.
Step-by-step guide for normal compressor startup.
Procedure for restarting the compressor after an emergency stop or shutdown.
How to monitor the compressor during operation and check the display.
Instructions for manually controlling compressor loading and unloading.
Methods for stopping the compressor, including normal and emergency stops.
Steps for decommissioning and storing the compressor.
Summary of maintenance tasks based on operating hours and time intervals.
Lubrication and replacement intervals for fan and drive motors.
Recommended oil type and properties for compressor lubrication.
Step-by-step instructions for draining and refilling compressor oil.
Procedure for replacing oil filters and resetting service warnings.
Measures to take if the compressor is stored without running.
List of service kits for filters, oils, and parts with ordering numbers.
Procedure for checking, replacing air filters, and resetting warnings.
Instructions for cleaning air and oil coolers for optimal efficiency.
How to operate and test the safety valve.
Identifies common error messages and provides remedies for operational issues.
Information displayed during operation, including pressure and status.
Overview of adjustable parameters for regulation, protection, and service.
Specifies pressure settings for safety valves on different compressor versions.
Details on setting overload relays and fuses for motors and fans.
Technical data for various compressor models under different operating conditions.
Table for converting SI units to British/US units.
