Need help?Do you have a question about the Atlas Copco ga75+ and is the answer not in the manual?
General| Model | GA 75+ |
|---|---|
| Category | Air Compressor |
| Max Working Pressure | 13 bar |
| Installed Motor Power | 75 kW |
| Drive Type | Direct Drive |
General and specific safety rules for installing the compressor.
Safety measures to be followed when operating the compressor.
Safety guidelines for maintenance and repair tasks.
Identifies electrical components and their references in the cubicle.
Provides service diagrams for electrical systems and components.
Introduces the regulator functions and automatic control.
Steps for initial installation and commissioning of the OSCi.
Details warnings like "Service required" and "Overflow warning".
Step-by-step guide for replacing OSCi filters.
Covers maintenance for compressor oil, bypass valves, and heat exchanger.
Provides examples of compressor room layout and ventilation proposals.
Details electrical connection diagrams and important remarks.
Safety, lifting, and control mode information before first start.
Procedure for initial start-up, including safety and connections.
Pre-start checks, oil level, rotation direction, and settings.
Steps for starting the compressor and related checks.
Warnings and checks for the compressor while operating.
Procedures for normal and emergency stopping of the compressor.
Steps for safely taking the compressor out of operation.
Outlines daily, 3-monthly, and interval-based maintenance tasks.
A detailed checklist of maintenance operations by period.
Procedure for changing compressor oil and filters.
Steps for replacing the air filter element and resetting the indicator.
Operating and testing procedures for safety valves.
Lists common faults, remedies, and troubleshooting steps.
Provides detailed technical data for GA 55+, GA 75+, and GA 90 compressors.
To Next Page
