Atlas Copco Power Focus 4000 Quick Guide

POWER FOCUS
QUICK GUIDE
SAFETY INSTRUCTIONS
When using electric products, basic precautions should be followed:
❑ THIS EQUIPMENT MUST BE EARTH GROUNDED
❑ Always disconnect the equipment from the mains, by pulling the
plug, before opening it for installation, service etc
❑ Do not use this product near water

Atlas Copco Power Focus 4000 Specifications

General

Input Voltage	100-240 VAC
Input Frequency	50-60 Hz
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Communication Interface	Ethernet, RS-232
Communication	Ethernet
Fieldbus protocols	PROFIBUS
Tightening methods	Torque, Angle, Torque & Angle, Yield
I/O	Digital and analog I/O