Atlas Copco Power Focus 4000 Compact User Manual

Power Focus
Quick Guide
SAFETY INSTRUCTIONS
When using electric products, basic precautions should be followed:
❑ THIS EQUIPMENT MUST BE EARTH GROUNDED
❑ Always disconnect the equipment from the mains, by pulling the
plug, before opening it for installation, service etc
❑ Do not use this product near water

Atlas Copco Power Focus 4000 Compact Specifications

General

Supply voltage	100-240 VAC
Operating temperature	0-45 °C (32-113 °F)
Protection class	IP40
Frequency	50-60 Hz
Fieldbus	PROFIBUS
Power supply	100-240 VAC
Storage temperature	-20°C to +70°C
Relative humidity	15-90% non-condensing
Communication interface	Ethernet, USB, RS-232