Need help?Do you have a question about the Atlas Copco FOCUS 61 and is the answer not in the manual?
General| Type | Controller |
|---|---|
| Power supply | 24 V DC |
| Weight | 1.2 kg |
| Protocol | Open Protocol |
| Current consumption | 0.5 A |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -20°C to 70°C |
| Relative humidity | Max. 90% non-condensing |
| Communication interface | Ethernet |
Introduces the user guide structure and its main parts.
Lists technical specifications of the Focus 61 device.
Describes the Focus 61 as a controller for production lines and its capabilities.
Provides steps and warnings for mounting the Focus 61 unit.
Explains the sequence of screens during Focus 61 startup.
Describes the function of the device's navigation buttons.
Details the meaning and functionality of the front panel LEDs.
Explains the function and connections of the two Ethernet ports.
Lists parameters and terminator specification for the barcode scanner.
Describes parameters and pin assignment for the I/O BUS (CAN) interface.
Lists parameters of the Wave Flexible Antenna used for communication.
Explains the role of SD cards for the operating system and data storage.
Details the digital output connector, voltage, and current specifications.
Step-by-step guide for installing the ToolsTalk BLM software.
Instructions for registering the ToolsTalk BLM software online.
Information on how to upgrade the installed ToolsTalk BLM software.
Describes how to establish a connection between ToolsTalk BLM and the Focus 61.
Explains how to define and rename stations associated with the Focus 61.
Details how to associate Mechatronic Wrenches (MWR) with stations.
Describes how to configure Pset parameters for tightening processes.
Explains how to define and configure Jobs, which are sets of tightening operations.
Covers configuring identifiers for starting Jobs based on barcode or other inputs.
Guides on configuring connected accessories like Stacklights and I/O Expanders.
Outlines the procedure to start and perform tightening operations.
Explains how to view real-time tightening results from connected wrenches.
Describes how to configure and view stored tightening results.
Guides on downloading and displaying trace data from MWRs.
Explains how to download files from the Focus 61's SD cards.
Displays core information about the Focus 61 device.
Allows configuration of parameters characterizing the Focus 61.
Covers language, measuring unit, and time synchronization settings.
Enables selection and application of filters to stored results.
Configuration options for the barcode scanner interface.
Adjustments for brightness and contrast of the device display.
Functionality to locate wrenches by scanning frequencies.
Settings for radio frequency parameters of the controller and wrench.
Guides on configuring Ethernet ports and network parameters.
Manages available protocols for communication between ToolsTalk BLM and Focus 61.
Explains enabling ToolsNet for collecting tightening data.
Describes the CBP basic output protocol and data format.
Instructions for cleaning the Focus 61 device.
Steps for replacing the miniature fuses in the Focus 61.
Provides common error messages and solutions for the Focus 61.
To Next Page