Atlas Copco FOCUS 61

Introduction Focus 61 User Guide
9839 0211 01 Edition 2.0 8 (118)
1 INTRODUCTION
1.1 About this Document
This document is a User Guide for the Focus 61: it consists of the following main parts:
Part
Name
Description
Chapter 1
Introduction
This chapter introduces this User Guide and provides the
technical specifications for the Focus 61.
Chapter 2
System Overview
This chapter introduces the Focus 61 with its main
functions.
Chapter 3
Installation Instructions
This chapter explains how to install the Focus 61.
Chapter 4
User Interfaces
This chapter provides an overview of the user interfaces
available on the Focus 61.
Chapter 5
Working with ToolsTalk
BLM
This chapter introduces the operations into the Focus 61
management software.
Chapter 6
Programming Focus 61
This chapter drives the operator in programming the Focus
61 in order to work on the production line. This includes
creating the Pset for the MWR and programming the Jobs.
Chapter 7
Executing Tightening
Operations
This chapter explains how to execute tightening operations
with MWR connected with the Focus 61.
Chapter 8
Live Monitor
This chapter explains how to view live results with
ToolsTalk BLM.
Chapter 9
Results Viewer
This chapter explains how to review the results of the
tightening operations with ToolsTalk BLM.
Chapter 10
Trace viewer
This chapter explains how to review the traces of the
tightening operations with ToolsTalk BLM.
Chapter 11
SD card explorer
This card explains how to download the files saved in the
SD card of the Focus 61.
Chapter 12
Settings
This chapter explains how to setup the Focus 61.
Chapter 13
Working with Protocol
This chapter describes how to work with Atlas Open
Protocol application.
Chapter 14
Working with ToolsNet
This chapter describes how to work with ToolsNet.
Chapter 15
CBP
This chapter describes the CBP (output protocol).
Chapter 16
Maintenance
This chapter describes the required maintenance
procedures for the Focus 61.
Chapter 17
Troubleshooting Guide
This chapter explains how to solve the most common
problems while working with the Focus 61.