Focus 61 User Guide Programming Focus 61
55 (118) 9839 0211 01 Edition 2.0
6.3.1 Pset parameters settings - Strategy
Below are the available tightening strategies:
• Torque controlled: Only the torque is measured.
The test result is OK if the maximum torque applied during the tightening is within the torque
limits:
• Torque controlled, angle monitored: Torque and angle are measured.
The test result is OK if the maximum torque applied during the tightening is within the torque
limits, and the angle is also within the angle limits:
To Next Page
Loading...
