Atlas Copco EBL RE-Drive User Manual

EBL Drives and Controllers
Printed Matter No. 9836 5849 01
Publication Date 2019-08-26
Valid for Version No. 1
Configuration Manual
EBL Drive 8431 0170 70
EBL Drive Plus 8431 0170 85
EBL RE-Drive 8431 0170 75
EBL RE-Module 8431 0170 76
EBL LS controller 8431 0170 81
EBL ST controller 8431 0170 80
WARNING
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference

Atlas Copco EBL RE-Drive Specifications

General

Brand	Atlas Copco
Model	EBL RE-Drive
Category	Controller
Language	English

Summary

EBL Drive and EBL Drive Plus

Installation

Instructions for mounting and securing the EBL Drive power pack unit.

Operating Instructions

Guide to operating the EBL Drive/Plus, including speed selection and torque adjustment.

EBL ST Controller

Connectors and Adjustments

Identifies connectors and describes adjustments for soft start timer and speed.

Setting of EBL Model

Instructions for setting the EBL model by selecting the correct plug inside the controller.

EBL LS Controller

Connectors/Display

EBL RE-Drive and EBL RE Module

Introduction

Front Panel

Rear Panel

Input Signals (SET, RESET)

Output Signals (COMP, VALVE, BZ, ER BZ)

Settings

Enter Settings

Main Setting Table

System Setting Tables

Quick Start Example

Functions

Detailed explanations of specific functions like Batch Setting and Re-hit Timer.

Troubleshooting

Guidance on diagnosing and resolving common issues encountered with the unit.

Timing Chart