Need help?Do you have a question about the Atlas Copco POWER FOCUS 6000 and is the answer not in the manual?
General| Model | POWER FOCUS 6000 |
|---|---|
| Category | Controller |
| Connectivity | Ethernet, USB |
| Supply voltage | 100-240 V AC |
| Frequency | 50/60 Hz |
| Fieldbus protocols | PROFINET, EtherNet/IP |
| Data storage | Internal memory |
| Operating temperature | 0°C to +45°C |
| Storage temperature | -20 to 70 °C |
| Relative humidity | 90% (non-condensing) |
Describes the Power Focus controllers and their features.
Explains setting up tightening parameters like torque, angle, and strategy.
Explains electronic and physical methods for license distribution.
Describes server-based vs. USB device methods for feature distribution.
Details using ToolsTalk for distributing virtual stations and features.
Explains using a USB device for distributing stations and features offline.
Introduces the default strategy for fast, ergonomic tightening.
Describes the Two Step strategy and guides on its fine-tuning.
Explains the Quick Step strategy for reducing preload scatter.
Details the Three Step strategy including a conditioning step.
Explains setting limits for torque and angle monitoring.
Explains using compensation to improve clamping force accuracy.
Covers upgrading controllers and programming parameters via ToolsTalk 2.
Details easy data collection setup and enhanced reporting/filtering.
Highlights increased production traceability via analysis of tightening traces.
To Next Page
