48 49
TOOLSNET 8
ToolsNet 8 is the next generation data collection and production analysis
software from Atlas Copco. In order to achieve the highest value in the
application the whole web application was rebuilt from scratch, making it
possible to leverage on new modern technologies. In the base ToolsNet 8
still has the reliable data collection that has been developed by Atlas Copco
for almost 15 years.
With the new additions of the dashboard, statistical center and the tool
center we make sure the value of the product is increased to an even higher
level.
Reliable Data Collection
Collecting data is easy when using an Atlas Copco controller in combination
with ToolsNet 8. After ToolsNet 8 is installed just set the IP-address of the
ToolsNet 8 server in the controller and it immediately starts sending over
tightening results. ToolsNet 8 also supports competitor tools through
ToolsNet 8 Open Protocol. With Open Protocol it is important to check with the
competitor regarding what functionality they have implemented on their side.
Simple setup in combination with Atlas Copco controllers
Data buffers both on the controller itself but also on the ToolsNet 8
application server in case the database goes down which ensure high
security.
Simple Data Analysis
In ToolsNet 8 the reports have been further enhanced, meaning more of the
daily work and analysis can be done directly in ToolsNet 8.
• Possibility to filter directly in the reports
• All users can choose what fields they want to see in
their reports
• Possibility to group data directly from the reports
• Save favorite reports which increases the efficiency
when working with the application
• Export reports to Excel for further analysis
• Get detailed information about tightening results
• Simple access to all traces
Production Alarms
ToolsNet 8 makes it simple to setup alarms based on specific controller
events in production. All the events that are available in the Power Focus
and the PowerMACS controller can be setup as events in the notification
center of ToolsNet 8. After it has been setup, an email will go out to the
configured receiver as soon as there is an event, making it possible to
cut down response times and thereby reducing the time it will take to fix
production problems.
• Reducing down-time thanks to direct notification
about production problems
• Simple setup of notification means customers will
use it
Alarms based on statistical trends. Find material problems or process
problems automatically.
Dashboard
The dashboard gives a direct overview of the production in the plant. Every
user can configure the dashboard in a way that best suits their needs. For
example, if a user wants to focus on statistics it is possible to setup multiple
widgets showing SPC data in real-time for specific applications making it
easier to catch problems related to material or process problems.
Available dashboard widgets are:
• Top NOK applications: Shows the applications with
the highest failure rate for a configured part of the
tool structure.
• Running SPC: Shows the real-time X-bar and range
charts for a configured application.
• Tool maintenance: Shows the tools that need service
or calibration, from all the Power Focus tools in
production (currently only support Power Focus
W10.6+ and W14 controllers).
• Latest results: Shows an overview of the latest results
from the chosen part of the of the tool structure.
Traceability
ToolsNet 8 greatly increases the traceability in our customer’s production.
With the application it is possible to find a specific product and ensure that
all tightening have been done correctly by for example analysis the traces.
• Get all results based on a time interval
• Get all results based on a specific VIN number
• Find statistical deviations based on all tightening results.
To Next Page
Loading...
Need help?
General
