Atlas Copco Power Focus 4000 Graph User Manual

Power Focus
Quick Guide
SAFETY INSTRUCTIONS
When using electric products, basic precautions should be followed:
❑ THIS EQUIPMENT MUST BE EARTH GROUNDED
❑ Always disconnect the equipment from the mains, by pulling the
plug, before opening it for installation, service etc
❑ Do not use this product near water

Atlas Copco Power Focus 4000 Graph Specifications

General

Brand	Atlas Copco
Model	Power Focus 4000 Graph
Category	Controller
Language	English

Summary

Safety Instructions

Getting Started

Putting together the Tensor system

Details on assembling the Power Focus controller, RBU, cable, and tool.

Mounting and connecting

Step-by-step guide for physically mounting and connecting the controller.

The Compact user interface

Explanation of buttons and indicators on the Compact controller interface.

The Graph user interface

Overview of the color display and its configurable information.

ToolsTalk PF

Instructions for connecting and using the ToolsTalk PF software.

Strategies

Setting up the normal two-stage tightening

Guide to configuring two-stage tightening using AutoSet or QuickProg.

Monitoring the first stage of your tightening

Methods for controlling and monitoring the rundown phase of screw cycles.

Yield control

Using yield control for higher clamp force and improved joint characteristics.

Detecting a "rehit"

How the system detects and handles re-tightening on an already fastened bolt.

Configuration

Setting up an accessory in W07

Procedure for configuring accessories using ToolsTalk PF W07.

Logic Configurator

Creating logic sequences for controlling processes and signals.

Station control using Logic Configurator

Implementing logic for controlling a workstation with pneumatic cylinders.

Trouble Shooting

Event Codes

List and explanation of various error codes encountered during operation.