25
Event Event Text Acknow- Explanation
Code ledge
E000-E099: Rundown errors
E003 Incorrect programming - Check that there is socket movement in
the second stage
E100-E199: Event-related errors
E102 Rundown prohibited due - This error code is displayed after a NOK
tightening to Lock on Reject when the
function Lock on Reject is activated.
In thiscase the tool is disabled, the tool
can be unlocked with a digital input or
with the tool ring.
E103 Tool locked by digital
input
- The tool is locked via the digital input
E107 Rundown prohibited
due to
Line Control, batch not
enabled
- A job using Line Control is selected.
The job does not start until
Line Control Start signal is received.
E112 Rehit -
Event code Group Description
E001-E099 0 Rundown failures
E100-E199 1 Event-related errors
E200-E299 2 User input events
E300-E399 3 Statistical events
E400-E499 4 Communication events
E500-E599 5 Hardware events TOOL
E600-E699 6 Hardware events
DC3000/MC3000
E700-E799 7 Hardware events
E800-E899 8 Software events
E900-E999 9 Events MMI3000
EVENT CODES
To Next Page
Loading...
Need help?
General
