Atlas Copco FOCUS 61

Focus 61 User Guide Programming Focus 61
31 (118) 9839 0211 01 Edition 2.0
5.3 Upgrading the software
If other versions of ToolsTalk BLM are already installed, the following message is displayed:
The installation process detected the following ToolsTalk BLM versions are
already installed on the system:
- ToolsTalk BLM x.y.0
- ...
Do you want to uninstall all the listed versions before to continue with
the new installation?
Click Yes to uninstall all the versions already installed.
Click No to keep all the versions already installed.
Close the previous version during the upgrading.
There is no impact through the upgrade on the settings, tightening programs and results.
5.4 Connecting with the Focus 61
NOTE: This paragraph describes the connection between Focus 61 and ToolsTalk BLM.
Click ToolsTalk BLM icon to run the software.
After clicking ToolsTalk BLM icon, the following screen opens: