Atlas Copco FOCUS 61

Focus 61 User Guide Working with Protocol
101 (118) 9839 0211 01 Edition 2.0
13 WORKING WITH Protocols
All the available protocols used for the communication between ToolsTalk BLM and Focus 61 are
managed in the Protocols page.
NOTE: In the Active protocol parameters tab, the parameters of the active protocol are listed.
In the Basic protocol parameters tab, the parameters common to all the available protocols are
listed.
NOTE: The functionalities of the Protocol management page are only usable as Super User.
NOTE: Only one protocol per time can be loaded and activated.
A
Active protocol section
B
Active protocol parameters tab
C
Basic protocol parameters tab
D
Available protocol section
C
B
A
D